Stevens Square Locksmith (612) 662-1116 Schedule an Estimate

Our Approach to Lock Work

A visit runs in a set order: a few questions on the phone, the owner at your door, a look at the problem before any tool comes out, and work that starts once you agree to it.

The First Questions

A job starts with a call to (612) 662-1116 and a few questions: where you are, what the lock or door is doing, and whether anyone is locked out. Each answer shapes the visit. A key snapped in the cylinder is a different job from a deadbolt that will not turn, and someone shut outside, or a child or a pet shut in, makes it urgent.

The address is confirmed next, with the unit or suite number and the door in question: front, back, side or the building’s street door. Then Eric Allen, the owner, drives out to you.

A Look Before Any Tool

At the door, Eric looks over the problem before he picks up a tool. Lock trouble often starts somewhere other than the lock. A deadbolt that will not turn may have a worn cylinder, or the door may have shifted until the bolt binds in the strike. A latch that will not catch can be the strike, the hinges or a closer out of adjustment.

Each of those has a different fix, and some leave the lock alone: a lock that only needs its strike moved can stay on the door.

A Plan You Agree To

He tells you what he plans to do: open the door by picking or with a bypass tool, rekey the cylinder, repair the lock or replace it. The work begins once you agree to it.

That order holds for a lockout as much as for a planned lock change. The decision about your door stays with you, and you know what is about to happen before it happens.

How a Lock Job Is Generally Assessed

Behind those steps is the way the trade generally works through a lock problem, in four parts.

  1. Identify the Door and the Lock

    The lock comes first: a cylindrical knob or lever, a bored deadbolt, a mortise lock in a pocket in the door edge, a rim lock on an old door, or an exit device. Then the door: wood or steel, solid or hollow, its thickness and which way it swings.

  2. Check the Frame and the Strike

    Many lock complaints start in the frame. Loose hinges let a door sag, a swollen door binds, and a strike out of line makes the latch or the bolt drag. A deadbolt should throw its full length without anyone leaning on the door.

  3. Choose Repair or Replacement

    Worn pins and springs, a loose spindle or a sticky latch are usually repairable, and rekeying changes the key without changing the lock. A cracked housing, a cylinder that has been drilled or forced, or hardware too light for the door points to replacement.

  4. Test the Operation

    The lock is tried with the door open, then closed: every key, the thumb turn, the lever, and the latch catching without a slam. A lock that works only when the door is held a certain way is not finished.

Technician in a gray polo and work gloves turning a key to test a newly fitted deadbolt on an open back door

Checks for Each Kind of Job

The same four parts look different from one job to the next. A lockout turns on who may enter and how the door is locked; a car key turns on the car’s chip and its papers.

Checks and Approaches by Job Type
Job typeWhat gets checkedCommon approach
Lockout Proof you may enter; the lock type; whether a deadbolt is thrown or only the latch Picking or a bypass tool first; drilling only when those fail, with the cylinder replaced after
Rekey Which doors, how many keys, whether the cylinders share a keyway New pins set to a new key, with doors keyed alike where wanted
Replacement The bore, the backset, the door’s thickness and the strike A lock that fits the existing holes, or the door bored for a new one
Car key Year, make and model; title or registration; whether any key still works A key cut to the lock, and a transponder chip programmed to the immobilizer where the car has one; some newer cars need the dealer
Commercial hardware Exit routes, fire-door labels, closers, and who holds the keys Hardware that suits the door’s rules, with exits still opening from inside without a key

Safety and Code Points

Lock work runs into rules written for buildings: the building and fire codes Minnesota adopts, and the ADA standards for accessible design. These are general points, not a code review. The local building or fire official decides how a rule applies to a particular door.

  • Exit doors open from inside without a key. No chain, padlock or keyed bolt stands in the way out of a required exit.
  • Fire-rated door hardware stays compliant. The closer, the latch and the hinges are part of the door’s rating, so replacement hardware has to keep it.
  • Accessible hardware on public and commercial doors. Levers, push bars and pulls that work with one hand take the place of round knobs.
  • Permission from the owner or landlord. A tenant generally needs the landlord’s agreement before a lock is changed or rekeyed, and many leases call for a key to be handed over.
  • Proof that you are entitled to enter. A locksmith who opened doors for anyone who asked would be helping break-ins, so proof of address or ownership comes before the work.
Rules Behind Lock Work
RuleWhere it appliesWhat it means for your door
Egress without a key or special knowledge Required exits from businesses and apartment buildings; a house’s main exit door under residential codes A thumb turn, lever or push bar inside and one motion to open; no double-cylinder deadbolt on the way out
Fire-rated doors self-close and latch Stair doors, corridor doors and other doors in fire-rated walls A working closer and a latch that catches every time, with hardware listed for fire doors; no added bolts or extra holes that void the label
Accessible hardware (ADA) Doors on accessible routes in public and commercial buildings Usable with one hand, without tight grasping, pinching or twisting of the wrist, and mounted 34–48 inches off the floor: levers and push bars rather than round knobs
Entitlement to enter Every lockout, rekey and lock change, on a home, a business or a car An ID with the address, a lease or mail in your name; for a car, the title or registration

Answers on landlords, building street doors and proof for a car are collected under Questions.

Calls and Written Requests

A lockout is easiest to start by phone, since the first questions take a minute to answer out loud. Planned work, such as a rekey after a move, a new deadbolt or a master key system for a small building, can start in writing: send the address and what the lock is doing through Schedule an Estimate, and the visit follows the same order.